Inspired by this article, I finally deployed my Soekris Net4801 small form factor system. I used a hard drive-based installation as I figured that would be the easiest way to experiment with OpenBSD and the Soekris. The installation was simple. First I swapped my main laptop HDD for an extra 3250 MB HDD to hold OpenBSD. Next I rebooted the laptop using the OpenBSD 3.5 installation CD, and installed OpenBSD. Here is my partition scheme:
$ df -h
Filesystem Size Used Avail Capacity Mounted on
/dev/wd0a 125M 21.8M 97.8M 18% /
/dev/wd0f 156M 2.0K 148M 0% /tmp
/dev/wd0d 2.0G 169M 1.7G 9% /usr
/dev/wd0e 501M 6.9M 469M 1% /var
After reboot, I made these edits:
/etc/ttys
tty00 "/usr/libexec/getty std.19200" vt100 on secure
/etc/boot.conf
set tty com0
stty com0 19200
/etc/hostname.sis0
inet 172.27.20.13 255.255.255.0
/etc/mygate
172.27.20.1
After these edits I shut down the system and installed the 3250 MB HDD in the Soekris. I put my original HDD back into my laptop, and connected a serial cable and null modem from the laptop to the Soekris. Before powering on the Soekris I connected to the serial console:
# tip -19200 com1
connected
When I plugged in the Soekris power, I saw these messages:
POST: 0123456789bcefghipajklnoq,,,tvwxy^[[2J
comBIOS ver. 1.24 20040312
Copyright (C) 2000-2004 Soekris Engineering.
net4801
CPU Geode 266 Mhz 0128 Mbyte Memory
Pri Mas IBM-DTCA-23240
LBA Xlt 788-128-63 3177 Mbyte
PXE-M00: BootManage UNDI, PXE-2.0 (build 082)
Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int
-------------------------------------------------------------------
0:00:0 1078 0001 06000000 0107 0280 00 00 00 00000000 00000000 00
0:06:0 100B 0020 02000000 0107 0290 00 3F 00 0000E101 A0000000 10
0:07:0 100B 0020 02000000 0107 0290 00 3F 00 0000E201 A0001000 10
0:08:0 100B 0020 02000000 0107 0290 00 3F 00 0000E301 A0002000 10
0:18:2 100B 0502 01018001 0005 0280 00 00 00 00000000 00000000 00
0:19:0 0E11 A0F8 0C031008 0117 0280 08 38 00 A0003000 00000000 11
Seconds to automatic boot. Press Ctrl-P for entering Monitor.
Using drive 0, partition 3.
Loading...
probing: pc0 com0 com1 pci mem[639K 127M a20=on]
disk: hd0+
> OpenBSD/i386 BOOT 2.06
switching console to com0
com0: changing speed to 19200 baud in 5 seconds, change your terminal to match
!
com0: 19200 baud
boot>
booting hd0a:/bsd:
entry point at 0x100120
[ using 404824 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2004 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.5 (GENERIC) #34: Mon Mar 29 12:24:55 MST 2004
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC" 586-class) 267 MHz
cpu0: FPU,TSC,MSR,CX8,CMOV,MMX
cpu0: TSC disabled
real mem = 133804032 (130668K)
avail mem = 117899264 (115136K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
...truncated...
I now have a fully functional OpenBSD 3.5 system on the Soekris. That was fairly easy! Lots of sites describe how to install, augment, and use Soekris systems:
OpenBSD 3.5 on a Soekris Net4801
Netgate Soekris kits
0 komentar:
Posting Komentar